中文 
Immobility Clamp is used for fixing or connecting other hardware fittings onto the tower/pole.
Immobility Clamp is used for fixing or connecting other hardware fittings onto the tower/pole. It is divided into Immobility Clamp for tower and Immobility Clamp for Pole. Immobility Clamp for tower uses metal clamp while Immobility Clamp for Pole uses hoop.
Tension Clamp is used for angle tower or terminal tower to provide suspension point for ADSS cable. Straight Clamp is used on tangent tower while hoop is used to fix Preformed Dead-end and Preformed Suspension Set on the pole to provide suspension point on ADSS cable.
| ltem | Type | Dimension of main stand for | Material | Devastating Load(kN) |
| cable fixing location | ||||
| Straight Clamp | TZJ070 100 | 81~100mm | galvanized steel | 70 |
| TZJ070 125 | 101~125mm | 70 | ||
| TZJ070145 | 126~145mm | 70 | ||
| TZJ070165 | 146~165mm | 70 | ||
| TZJ 070 200 | 166~200mm | 70 | ||
| Tension clamp | TNJ100100 | 81~100mm | 100 | |
| TNJ 100 125 | 101~125mm | 100 | ||
| TNJ100 145 | 126~145mm | 100 | ||
| TNJ100165 | 146~165mm | 100 | ||
| TNJ 100 200 | 166~200mm | 100 |
