How to pay attention to storage and transportation of wires and cables?

Qingzhou cable manufacturer share with you the matters needing attention in terms of wire and cable storage and transportation:

1. Avoid storing cables in the open air as much as possible, and the cable trays are not allowed to be laid flat;

2. There shall be no harmful gases that damage insulation and corrode metals in the warehouse where cables are stored;

3. When storing the cable, it is strictly forbidden to contact with acid, alkali and mineral oil, and it should be stored separately from these corrosive substances;

4. During the storage period, the cables should be rolled regularly (once every 3 months in summer, and can be extended as appropriate in other seasons). When rolling, turn the bottom side of the storage tray upside down to prevent the underside from getting wet and rotting. When storing, always pay attention to whether the cable head is intact;

5. The cable storage period is limited to the product ex-factory period, generally not more than one and a half years, and the longest is not more than two years;

6. During transportation, it is strictly forbidden to drop cables or cable trays with cables from a high place, especially at lower temperatures (generally about 5°C and below), throwing or dropping cables may cause the insulation and sheath to crack;

7. When hoisting the package, it is strictly forbidden to hoist several trays at the same time. On vehicles, ships and other means of transport, cable reels should be fixed in a suitable way to prevent collision or overturning, so as to prevent mechanical damage to the cables.